EDWARDS SIGNALING TELEPHONE SIGNAL SIGNALS SIGNALING AND ACCESSORIES

1-800-843-6036

Click Here to Email Us

   OnLine Order

Supported Browsers IE, SAFARI, CHROME

More Edwards Signaling Solutions

TELEPHONE SIGNALS & ACCESSORIES


.MECHANICAL TELE-CODE ® RELAYS

 

PANEL MOUNT

B-8313 SERIES

FEATURES
  • Long-life tungsten contacts
  • Gray finish
  • High grade copper coils
The Edwards electro-mechanical, panel mount, telecode relays are designed to activate up to 5 vibrating-type horns, buzzers, and bells.  The unit's windings are rated in ohms rather than volts.  Wire size and number of turns vary with resistance requirements.

The B-8313 series is not supplied with a capacitor.  If a capacitor is required, order the Cat. No. B-8325 one micro farad, 400V capacitor with bracket.  Unit mounts to any flat surface using the mounting holes on 3 1/2" (89mm) centers.

Relays operating on AC ringing voltage and used on common battery circuits require capacitors.  Relays operating on DC ringing voltages do not require capacitors unless energized by a common battery.

For areas where ambient noise levels are high or where personnel are unable to be near telephones at all times such as factories, loading docks, mines, quarries, lumber yards, gas stations, foundries, etc.

AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (NO. 329USA-21250-RG-N)
SPECIFICATIONS
  • Normally open circuit relay
  • Two shading coils prevent armature chatter
  • Relays mounted on 4 1/4" (108mm) bakelite base

ORDERING INFORMATION

Specify pull up coil resistance, voltage, and frequency data.  For standard phone system ringing circuits, specify same coil resistance as bell ringer coils.  For intercommunicating phone ringing circuits, specify relays of same voltage and frequency as ringing circuit.
Cat. No. DC Coil Resistance (ohms) With Capacitor VAC Without Capacitor VAC Without Capacitor VDC Price Each
B-8313-P-1000* 1000

100-115

105-115 18 $146.00
B-8313-P-1600* 1600 140-170 170-200 24 $146.00
B-8313-P-2500* 2500 200-230 200-230 30 $146.00
B-8313-P-3000* 3000 220-277 220-277 40  
*Not supplied with capacitor

 

MECHANICAL TELECODE® RELAYS

PRESSED STEEL B-8315 &B-8316 SERIES

PRESSED STEEL MECHANICAL TELECODE RELAY B-8315 & B-8316 SERIES

 

FEATURES

  • Long-life tungsten contacts

  • Gray finish

  • High grade copper coils

  • Hinged cover

The Edwards electro-mechanical, pressed steel, telecode relays are designed to activate up to 5 vibrating-type horns, buzzers, and bells.  The unit's windings are rated in ohms rather than volts.  Wire size and number of turns vary with resistance requirements.

The B-8316 series relay is supplied with a capacitor; the  B-8315 series is not.  If a capacitor is required, order the Cat. No. B-8325 one micro farad, 400V capacitor with bracket.

Unit mounts to any flat surface using the mounting holes on 3 3/8" (86mm) centers. 1/2" (13mm) and 3/4" (19mm) knockouts are provided for input and output wiring.

Relays operating on AC ringing voltage and used on common battery circuits require capacitors.  Relays operating on DC ringing voltages do not require capacitors unless energized by a common battery.

For areas where ambient noise levels are high or where personnel are unable to be near telephones at all times such as factories, loading docks, mines, quarries, lumber yards, gas stations, foundries, etc.

AGENCY APPROVALS
  • UL 2017 Listed
  • B-8316 Series is registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)
FEATURES
  • Normally open circuit relay
  • Two shading coils prevent armature chatter

ORDERING INFORMATION

Specify pull up coil resistance, voltage, and frequency data.  For standard phone system ringing circuits, specify same coil resistance as bell ringer coils.  For intercommunicating phone ringing circuits, specify relays of same voltage and frequency as ringing circuit.
Cat. No. DC Coil Resistance (ohms) With Capacitor VAC Without Capacitor VAC Without Capacitor VDC Price Each
B-8315-P-1000* 1000 100-115 105-115 18 $176.00
B-8315-P-1600* 1600 140-170 170-200 24 $176.00
B-8315-P-2500* 2500 200-230 200-230 30 $176.00
B-8315-P-3000* 3000 220-277 220-277 40  
B-8316-P-1000** 1000 100-115 - - $237.00
B-8316-P-1600** 1600 140-170 - - $237.00
B-8316-P-2500** 2500 200-230 - - $237.00
B-8316-P-3000** 3000 220-277 - -  

*Supplied without capacitor                                                                                                                               **Supplied with 1 micro farad @ 400V capacitor

MECHANICAL TELECODE® RELAYS

HAZARD LOCATION B-8319 & B-8320 SERIES

HAZARDOUS LOCATION MECHANICAL TELECODE RELAYS

B-8319 & B-8320 SERIES

FEATURES
  • Long-life tungsten contacts
  • Gray finish
  • High grade copper coils
  • Explosion proof housing
The Edwards hazardous location, electro-mechanical, telecode relays are designed to activate up to 5 vibrating-type horns, buzzers, and bells.  The unit's windings are rated in ohms rather than volts.  Wire size and number of turns vary with resistance requirements.

The B-8320 series relay is supplied with a capacitor; the B-8319 series is not.  If a capacitor is required, order the Cat. No. B-8325 one micro farad, 400V capacitor with bracket.

Unit mounts to any flat surface using the mounting lugs on 6 3/4" (171mm) centers.  Use 1/2" (13mm) conduit for input and output wiring.

Relays operating on AC ringing voltage and used on common battery circuits require capacitors.  Relays operating on DC ringing voltages do not require capacitors unless energized by a common battery.

For hazardous location areas where ambient noise levels are high or where personnel are unable to be near telephones at all times.

AGENCY APPROVAL
  • UL 1203 Listed for Class I, Division 1 and 2, Group D; Class II, Division 1 and 2, Groups F and G; and Class III locations
  • B-8320 Series is registered with the FCC in compliance with Part 68 or FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • Normally open circuit relay
  • Two shading coils prevent armature chatter

ORDERING INFORMATION

Specify pull up coil resistance, voltage, and frequency data.  For standard phone system ringing circuits, specify same coil resistance as bell ringer coils.  For intercommunicating phone ringing circuits, specify relays of same voltage and frequency as ringing circuit.
Cat. No. DC Coil Resistance (ohms) With Capacitor VAC Without Capacitor VAC Without Capacitor VDC Price Each
B-8319-P-1000* 1000 100-115 105-115 18 $280.00
B-8319-P-1600* 1600 140-170 170-200 24 $280.00
B-8319-P-2500* 2500 200-230 200-230 30 $280.00
B-8319-P-3000* 3000 220-277 220-277 40  
B-8320-P-1000** 1000 100-115 - - $342.00
B-8320-P-1600** 1600 140-170 - - $342.00
B-8320-P-2500** 2500 200-230 - - $342.00
B-8320-P-3000** 3000 220-277 - -  
*Supplied without capacitor                                                                                                                                               **Supplied with 1 micro farad @ 400V capacitor

MECHANICAL TELECODE® RELAYS

WEATHERPROOF B-8322 & B-8323 SERIES

WEATHERPROOF TELECODE RELAYS

B-8322 & B-8323 SERIES

FEATURES
  • Long-life tungsten contacts
  • Gray finish
  • High grade copper coils
  • Cast aluminum back box and cover
The Edwards weatherproof, electro-mechanical telecode relays are designed to activate up to 5 vibrating-type horns, buzzers, and bells.  The unit's windings are rated in ohms rather than volts.  Wire size and number of turns vary with resistance requirements.

The B-8323 series relay is supplied with a capacitor; the B-8322 series is not.  If a capacitor is required, order the Cat. No. B-8325 one micro farad, 400V capacitor with bracket.

Unit mounts to any flat surface using the mounting lugs on 6 3/4" (171mm) centers.  Use 1/2" (13mm) conduit for input and output wiring.

Relays operating on AC ringing voltage and used on common battery circuits require capacitors.  Relays operating on DC ringing voltages do not require capacitors unless energized by a common battery.

For areas where ambient noise levels are high or where personnel are unable to be near telephones at all times such as factories, loading docks, mines, quarries, lumber yards, gas stations, foundries, etc.

AGENCY APPROVALS
  • UL 2017 Listed
  • B-8323 Series is registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • Normally open circuit relay
  • Two shading coils prevent armature chatter

ORDERING INFORMATION

Specify pull up coil resistance, voltage, and frequency data.  For standard phone system ringing circuits, specify same coil resistance as bell ringer coils.  For intercommunicating phone ringing circuits, specify relays of same voltage and frequency as ringing circuit.
Cat. No. DC Coil Resistance (ohms) With Capacitor VAC Without Capacitor VAC Without Capacitor VDC Price Each
B-8322-P-1000* 1000 100-115 105-115 18 $233.00
B-8322-P-1600* 1600 140-170 170-200 24 $233.00
B-8322-P-2500* 2500 200-230 200-230 30 $233.00
B-8322-P-3000* 3000 220-277 220-277 40  
B-8323-P-1000** 1000 100-115 - - $292.00
B-8323-P-1600** 2500 200-230 - - $292.00
B-8323-P-2500** 2500 200-230 - - $292.00
B-8323-P-3000** 3000 220-277 - -  
*Supplied without capacitor                                                                                                                                                **Supplied with 1 micro farad @ 400V capacitor

 

REMOTE PHONE BELL

WIDE AREA PHONE SIGNALING B-KBH-5040-N5

REMOTE PHONE BELL

WIDE AREA PHONE SIGNALING

CAT. NO. B-KBH-5040-N5

PRICE EACH  $324.00

FEATURES
  • Completely self-contained
  • Solid state relay
  • AC of DC activation
  • Polycarbonate injection molded housing
  • Strain relief connectors for telephone line and power cord
The Edwards B-KBH-5040N5 phone bell provides remote indication of telephone operation.  The unit is powered by 12V 60 Hz and does not draw current on the phone circuit.

The unit is activated by a solid state, voltage sensing relay and responds to a 16-70 Hz ringing frequency.  Operation of the unit matches the ringing cycle of the telephone.  The unit has a 4" (102mm) steel gong.

Installs with three screws using the three external mounting lugs.

For use in areas that have medium ambient noise levels such as small warehouses, garages, car lots, gas stations, taxi stands, and construction sites.

SPECIFICATIONS
  • Key voltage:  10-150V DC
  • AC activation voltage:  10-250V AC 10-70 Hz
  • REN No:  1.5B @ >50V; 3.4B @<50V
  • 6 foot (1.83m) power cord
  • 88dB at 10 feet (3.05m)
AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)

 

REMOTE PHONE HORN

WIDE AREA PHONE SIGNALING  B-KHP-8010-N5

REMOTE PHONE HORN                 WIDE AREA PHONE SIGNALING

B-KHP-8010-N5

PRICE EACH $324.00

FEATURES
  • Completely self-contained
  • Solid state relay
  • AC or DC activation
  • Polycarbonate injection molded housing
  • Strain relief connectors for telephone line and power cord

The Edwards B-KHP-8010-N5 phone horn provides remote indication of telephone operation.  The unit is powered by 120V 60 Hz and does not draw current on the phone circuit.

The unit is activated by a solid state, voltage sensing relay and responds to a 16-70 Hz ringing frequency.  Operation of the unit matches the ringing cycle of the telephone.

Installs with three screws using the three external mounting lugs.

For use in areas that have medium ambient noise levels such as small warehouses, garages, car lots, gas stations, taxi stands, and construction sites.

SPECIFICATIONS
  • Key voltage:  10-150V DC
  • AC activation voltage:  10-250V AC 10-70 Hz
  • REN No:  1.5B @ >50V; 3.4B @ < 50V
  • 6 foot (1.83m) power cord
  • 104dB at 10 feet (3.05m)
AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)

 

REMOTE PHONE BELL

WEATHERPROOF    B-KBP-5060-N5

WEATHERPROOF REMOTE PHONE BELL

B-KBP-5060-N5

PRICE EACH  $300.00

FEATURES
  • Weatherproof and dust resistant
  • Completely self contained and gasket sealed
  • Low current draw
  • Solid state relay
  • 6" (152mm) chrome plated steel gong
The Edwards B-KBP-5060-N5 phone bell provides remote indication of telephone operation.  The unit connects to a 120V 60Hz supply. 

The unit operates on 10-250V AC ringing voltage or 10-150V DC key voltage.  Operation of the unit matches the ringing cycle of the telephone.

Bell hinges to the die cast back box housing for easy plug-in-installation.  Conduit is connected to the unit using the 3/4" (19mm) taps. 

For outdoor and indoor areas where ambient noise levels are high and personnel are unable to be near the telephone at all times.  Ideal for use in factories, foundries, warehouses, printing plants, car lots, gas stations, taxi stands, loading docks, lumber yards, and police and fire stations.

AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • REN No: 1.5B @ > 50V; 3.4B @ < 50V
  • 92dB at 10 feet (3.05)

 

REMOTE LINE POWERED PHONE HORN/STROBE

REMOTE LINE POWERED PHONE HORN/STROBE  

Hooks up with RJ-11 plug

B-KHE-1000-PP

PRICE EACH  $290.00

FEATURES
  • Xenon strobe lamp
  • Solid state circuitry
  • Polycarbonate white translucent lens with black lettering
  • Piezo horn - warble tone output
The Edwards B-KHE-1000-PP remote line powered phone horn/strobe operates on standard AC ringing voltage (85-115V AC) to provide remote audible and visual indication of a ringing telephone.  The units injected molded housing and cover ensure security.

The unit operates on the ringing voltage and matches the ringing cycle of the telephone.

The horn/strobe easily installs to the telephone using a modular telephone jack.  Cord and jack are not supplied.

For use in wide area coverage in noisy areas such as machine shops and equipment operating areas.

SPECIFICATIONS
  • REN No:  3.7B
  • Strobe:  3 to 7 flashes per cycle
  • Horn:  94dB at 5 feet (1.52m) volume adjustable
  • AC activation voltage:  85 -115V
  • Ringing frequency:  16 to 70 Hz

 

AGENCY APPROVALS
  • Registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)

 

REMOTE LINE POWERED PHONE STROBE

B-KHD-1000-PP

REMOTE LINE POWERED PHONE STROBE  

HOOKS UP WITH RJ-11 PLUG

B-KHD-1000-PP

FEATURES
  • Xenon strobe lamp
  • Solid state circuitry
  • Polycarbonate white translucent lens with black lettering                           

PRICE EACH   $193.00

The Edwards B-KHD-1000-PP remote line powered phone strobe operates on standard AC ringing voltage (85-115V AC) to provide remote visual indication of a ringing telephone.  The units injected molded housing and cover ensure security.

The unit operates on the ringing voltage and matches the ringing cycle of the telephone.

The strobe easily installs to the telephone using a modular telephone jack.  The cord and jack are not supplied.

For interior use in quiet areas such as libraries, broadcast studios, hospitals, and offices.

AGENCY APPROVALS
  • Registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • REN No:  3.7B
  • 3 to 7 Flashes per cycle
  • AC activation voltage:  85-115V
  • Ringing frequency:  16 to 70 Hz

 

REMOTE LINE POWERED PHONE HORN

B-KHS-1000-PP

REMOTE LINE POWERED PHONE HORN

HOOKS UP WITH RJ-11 PLUG

B-KHS-1000-PP

FEATURES
  • Solid state circuitry
  • Piezo horn - warble tone output

PRICE EACH    $193.00

The Edwards B-KHS-1000-PP remote line powered phone horn operates on standard AC ringing voltage (85-115V AC) to provide remote audible indication of a ringing telephone.  The units injected molded housing and cover ensure security.

The unit operates on the ringing voltage and matches the ringing cycle of the telephone.

The horn easily installs to the telephone using a modular telephone jack.  The cord and jack are not supplied.

For wide area coverage in noisy areas such as machine shops and equipment operating areas.

AGENCY APPROVALS
  • Registered with the FCC in compliance with Part 68 or FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • REN No:  3.7B
  • Horn:  94dB at 5 feet (1.52m) volume adjustable
  • AC activation voltage:  85 - 115V
  • Ringing frequency:  16 to 70 Hz

 

ELECTRONIC TELECODE® RELAY

B-ER-2000

ELECTRONIC TELECODE RELAY

B-ER-2000

Price Each  $280.00

Closest Product Offering to the #910

FEATURES
  • Hardwired unit
  • Injected molded enclosure
  • Strain relief grommets on wiring entrances
  • AC or DC activating voltage
The Edwards B-ER-2000 Electronic Telecode Relay is designed to activate remote extension signals such as horns, bells, strobes, or similar devices.  The relay is activated by the line ringing voltage of the telephone; operation of the connected signal matches the telephone ringing cycle.  The unit is designed for indoor use only.

The unit mounts to any flat surface using the supplied hardware.  All telephone, power input, and signal output connections are made internal to the unit.

For areas where ambient noise levels are high or where personnel are unable to be near telephones at all times.  Recommended for factories, loading docks, assembly areas, lumber yards, and gas stations.

AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with the FCC in compliance with Part 68 of FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • REN No:  1.5B @ > 50V; 3.4B @ < 50V
  • AC activation voltage:  10 - 250V
  • Ringing frequency:  16 to 70 Hz
  • Contact rating:  5 amps at 120V AC
  • DC keying voltage:  10-150V

 

 

WEATHERPROOF ELECTRONIC TELECODE® RELAY

B-ER-2100

WEATHERPROOF ELECTRONIC TELECODE RELAY

B-ERW-2100

FEATURES
  • Hardwired unit
  • AC or DC activation voltage

 

The Edwards B-ERW-2100 Electronic Telecode Relay is designed to activate remote extension signals such as horns, bells, strobes, or similar devices.  The relay is activated by the line ringing voltage of the telephone; operation of the connected signal matches the telephone ringing cycle.  The unit is designed for outdoor use.

Unit mounts to any flat surface using the supplied hardware.  Use 1/2" (13mm) conduit for input and output wiring.  All telephone, power input and signal output connections are made inside the unit.

For outdoor areas where ambient noise levels are high or where personnel are unable to be near telephones at all times.  Recommended for factories, loading docks, assembly areas, lumber yards, and gas stations.

AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with the FCC in compliance with Part 68 or FCC Rules and Regulations (No. 329USA-21250-RG-N)
SPECIFICATIONS
  • REN No:  1.5B @ > 50V; 3.4B @ < 50V
  • AC activation voltage:  10 - 250V
  • Ringing frequency:  16 to 70 Hz
  • DC Keying Voltage: 10 - 150V
  • Contact rating:  5 amps at 120V AC

 

ELECTRONIC TELECODE® RELAY  HAZARDOUS LOCATION

B-ERX-2100

ELECTRONIC TELECODE RELAY

HAZARDOUS LOCATION

B-ERX-2100

PRICE EACH   $310.00

FEATURES

  • Hardwired unit

  • AC or DC activation

  • Explosion proof housing

The Edwards B-ERX-2100 Electronic Telecode Relay is designed to activate remote extension signals such as horns, bells, strobes, or similar devices.  The relay is activated by the line ringing voltage of the telephone; operation of the connected signal matches the telephone ringing cycle.  The unit is designed for hazardous location use.

Unit mounts to any flat surface using the supplied hardware.  Use 1/2" (13mm) conduit for input and output wiring.  All telephone, power input, and signal output connections are made internal to the unit.

For hazardous location areas where ambient noise levels are high or where personnel are unable to be near telephones at all times.

AGENCY APPROVALS
  • UL 1203 Listed for Class 1, Division 1 and 2, Group D; Class II, Division 1 and 2, Groups F and G; and Class III locations
  • Registered with the FCC in compliance with Part 68 or FCC Rules and Regulations (No. 329USA-2150-RG-N)
SPECIFICATIONS
  • REN NO:  1.5B @ > 50V; 3.4B @ < 50V
  • AC activation voltage:  10 - 250V
  • Ringing frequency:  16 to 70 Hz
  • DC Keying Voltage:  10 - 150V
  • Contact rating:  5 amps at 120V AC

 

PHONE-PAGE® TELEPHONE SIGNAL ACTUATOR  910

PHONE-PAGE TELEPHONE SIGNAL ACTUATOR

910

Closest Product Offering to the 910 is Listed Above: Part#B-ER-2000

[910 is obsolete]

FEATURES
  • Beige housing
  • Modular duplex plug adaptor
  • High grade copper coils
The Edwards 910 Phone-Page Telephone Signal Actuator interfaces with an existing telephone to provide activation of a remote audible or visual signaling device when the telephone rings.  The signal actuation follows the ring pattern of the telephone.  The remote signal automatically turns off when the telephone is answered or the caller hangs up.  The remote signaling device is purchased separately.  See Phone Page Recommended Applications below.

A modular telephone line connects the Phone-Page to the telephone.  See Phone-Page Installation & Accessories.  Unit plugs into a standard 120V AC wall outlet and draws power from the line to operate the remote audible or visual signal.

Ideal for use in factories, warehouses, loading docks, and construction sites.

AGENCY APPROVALS
  • UL 2017 Listed
  • Registered with the FCC in compliance with Part 68 of FCC Rules and regulations (No. GYX30D-19623-RG0N)

SPECIFICATIONS

  • Nominal input:  120V 50/60 Hz
  • Input limits:  102 - 132V 50/60 Hz
  • Max output load:  10 amps resistive, 4 amps inductive, 300 watts tungsten
  • Standby power:  0 watts; power on:  0.67 watts @ 90V
  • Ring signal limits:  90V AC +/- 30% @ 20 Hz @ 0.33 duty factor
  • Tip to ring input impedance:  11.705 ohms
  • DC input resistance:  infinite
  • REN No:  1.0A/1.7B

 

    EDWARDS® PHONE-PAGE® RECOMMENDED APPLICATIONS

Cat. No. Device Voltage Rating Current Rating Appliance Consumption Price Each

STANDARD APPLICATIONS

 

Bells

       
340-4N5 Adaptable - 4" Vibrating 120V AC 50/60 Hz 0.06 Amps 7.2 Watts $104.00
340-6N5 Adaptable - 6" Vibrating 120V AC 50/60 Hz 0.07 Amps 8.4 Watts $125.00
340-10N5 Adaptable - 10" Vibrating 120V AC 50/60 Hz 0.07 Amps 8.4 Watts $147.00
 

Horns/Sirens

       
874-N5 Adaptahorn 120V AC 50/60 Hz 0.13 Amps 15.6 Watts $95.00
5520-N5 Duotronic Horn/Siren 120V AC 50/60 Hz 0.35 Amps 42.0 Watts $686.00
5530M-24N5 Adaptatone Millennium 120V AC 50/60 Hz 0.28 Amps 33.6 Watts $862.00

STANDARD APPLICATIONS - INDOOR/OUTDOOR USE

 

Lights

       
49*-N5-40WH AdaptaBeacon Flashing Light with Dust Cover 120V AC 50/60 Hz 0.30 Amps 36 Watts $261.00
50*-N5-40WH AdaptaBeacon Flashing Light 120V AC 50/60 Hz 0.30 Amps 36 Watts $203.00
52*-N5-40WH AdaptaBeacon Rotating Light 120V AC 50/60 Hz 0.35 Amps 42 Watts $207.00
92*-N5 AdaptaBeacon Strobe Light 120V AC 50/60 Hz 0.10 Amps 12 Watts $335.00
 

Horns

       
876-N5 Adaptahorn 120V AC 50/60 Hz 0.13 Amps 15.6 Watts $128.00

HAZARDOUS LOCATION APPLICATIONS

 

Lights

       
106EXPRINH*-N5 AdaptaBeacon Rotating Light 120V AC 50/60 Hz 0.35 Amps 42 Watts $,1248.00
106EXPST*-N5 AdaptaBeacon Strobe Light 120V AC 50/60 Hz 0.10 Amps 12.0 Watts $1,418.00
 

Bells

       
340EX-6N5 Adaptable - 6" Vibrating 120V AC 50/60 Hz 0.04 Amps 4.8 Watts $800.00
340EX-8N5 Adaptable - 8" Vibrating 120V AC 50/60 Hz 0.04 Amps 4.8 Watts $893.00
340EX-10N5 Adaptabel - 10" Vibrating 120V AC 50/60 Hz 0.04 Amps 4.8 Watts $974.00
 

Horns

       
878EX-N5 Adaptahorn 120V AC 50/60 Hz 0.13 Amps 15.6 Watts $679.00
*Specify lens color - amber (A), blue (B), clear (C), red (R), green (G) or magenta (M)

WARNING

Special precautions must be taken when wiring explosion proof signaling devices in hazardous environments.  Consult the National Electrical Code for specific information regarding proper wiring methods and materials.

 

1-800-843-6036

Click Here to Email Us

   OnLine Order

Supported Browsers IE, SAFARI, CHROME

More Edwards Signaling Solutions

 

 

Prices are subject to change without notice. Inventory is subject to prior sale. Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product.

Not Responsible for errors in print, verify all data with us or manufacturer. Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice.

Visit midsouthelectronics.com for more electronic solutions

Visit midsouthglobal.net