PLACE ON LINE ORDER

MORE PROTECTIVE COVERS AND BUTTONS

EMAIL US

MIDSOUTH CABLE HOME PAGE

 MINI THEFT STOPPER®

STI-6255

Here is an ingenious and inexpensive way to protect fire extinguishers and a wide range of other fire fighting equipment from theft.  The Mini Theft Stopper is compact, highly effective, extremely versatile and does not interfere with fire fighting in any way.  Its simplicity of design contributes greatly to its high degree of reliability.

For Cabinet Mounted Equipment, etc.

With its reed switch and magnet assembly, Mini Theft Stopper has a variety of applications.  It can be used on a fire extinguisher cabinet door or on cabinets housing fire hoses, sprinkler shutoff valves and other fire protection equipment.  In a similar way, it can be used for gun cabinets, medicine cabinets or any door you wish to protect.

FOR FREESTANDING EQUIPMENT, ETC.

Mini Theft Stopper comes with a special clip that can be used to protect a fire extinguisher standing alone or any other freestanding equipment you wish to protect, such as office gear or computer modules.  This model can also be mounted on a fire extinguisher pull pin.  The self-contained warning horn sounds when this pin has been pulled.

• Highly visible "stop sign" discourages wrongful use of fire extinguisher.
• Sounds a powerful 107dB warning horn when activated, drawing attention in a hurry.
• Tough, ABS construction.
• Two methods of operation -- reed switch activation for cabinets and display cases and unique clip activation for fire extinguisher pins and other freestanding equipment.
• Three minute automatic reset upon activation.

• Deactivation pin provided for service by authorized personnel
• Does not interfere with use of protected fire fighting equipment.
• 9 VDC alkaline battery is included.
• Compact design (3.37"/86mm in diameter and 1"25mm deep) mounts easily next to fire extinguisher or cabinet.
• Operational temperature range is 32ºF - 120ºF (0ºC - 49ºC).
• Extremely cost-effective and easy to install.
• One year guarantee against breakage of ABS housing and electronic components.

DIMENSIONS AND TECHNICAL INFORMATION

PRODUCT INFORMATION

Mini Theft Stopper has two versatile methods of activation.  This flexibility of design and compact housing allows this multi-purpose unit to protect equipment or cabinets of virtually any kind without sacrificing performance.

VERSATILE SPRING STEEL ACTIVATION

A special spring steel clip offers a variety of possibilities.  The clip may be used to protect free-standing fire extinguishers by routing the extinguisher's pull pin through the holes in both prongs of the clip.  The clip is then held in place by the extinguisher's breakaway seal.  When the seal is broken to use the extinguisher, the alarm immediately sounds.  The steel clip may also be placed under almost any type of equipment.  When the protected device is lifted, the clip expand and the alarm will sound immediately.  NOTE:  If the extinguisher pin method is used, the State of California requires installation of pin seal by a licensed contractor.

REED SWITCH/MAGNET ACTIVATION

The second method of activation is the reed switch and magnet which can be used to protect doors and cabinets, etc.  The Mini Theft Stopper is mounted next to the door or in the cabinet and the reed switch mechanism on the door jam.  The magnet is mounted on the door so that when it is closed it is in close proximity to the reed switch.  When opened, the alarm will immediately activate.

PLACE ON LINE ORDER

MORE PROTECTIVE COVERS AND BUTTONS

EMAIL US

MIDSOUTH CABLE HOME PAGE