1-800-843-6036

 Email Us

Supported Browsers IE, SAFARI, CHROME

 Models AR2000-P AR2000-Z AR2000-M  Audio Multiplexing System Audio Router

PUBLIC ADDRESS FOR

INDUSTRIAL ENVIRONMENTS

• Operates on 24VDC or 120/240VAC

• Routes audio input to eight zones

and eight presets

• Activation of output via buttons or

dry contacts

• Access to paging via local

microphone or telephone

• Rack mount

• Auxiliary zone and preset

models available

• UL and cUL Listed and

FCC Approved

The Federal Signal AudioRouterTM is an audio multiplexing system

capable of directing selected audio inputs to specific zones. The

AudioRouter can be used in a public address system as a central

control for routing voice pages, pre-recorded messages, and other

audio sources to specified zones or areas within a facility.

The center of the AudioRouter system is the Model AR2000-M.

The AR2000-M accepts the following source inputs: 25Vrms,

70Vrms, 1 Volt peak-to-peak, a telephone line, and a local

microphone. The 25Vrms and 70Vrms inputs are designed for use

with the AM25CK, AM70CK, or any SelecTone® Command Unit or

CommCenter. The 1 Volt peak-to-peak input is suitable for linelevel,

amplified audio sources, such as CD players. The telephone

input allows users to broadcast messages from any telephone in

the facility. To page, the user dials the AudioRouter’s extension,

records a message, and hangs up. The digitally recorded message

is stored and broadcast over the system immediately after the

call is completed. The local microphone input works with the

Federal Signal Models MNC-1 Hand-held Microphone or MSB-1

Desktop Microphone.

AudioRouter outputs are organized into two source Channels and

eight Zones. Combinations of multiple Zones and Channels can be

programmed into eight additional Presets. Zones, Channels, and

Presets are easily programmed and selected with buttons on the

front panel of the unit. Presets can also be activated remotely via

dry contacts located on the back panel of the unit. An ‘All-Call’

button located on the front panel selects all zones simultaneously.

Outputs can be configured for 25Vrms, 70Vrms, or 1 Volt peak-topeak.

The 25Vrms and 70Vrms lines are suitable for use with

SelecTone amplified speakers and the 1 Volt peak-to-peak can be

coupled with any AudioMaster HP Series Amplifier to drive

AudioMaster® Speakers.

Should more than eight Zones and Presets be required, auxiliary

units can be added for increased capacity. The AR2000-Z offers

eight additional Zones and the AR2000-P offers eight additional

Presets. Seven of each model can be installed with a single

AR2000-M to provide for a total of 64 Zones and 64 Presets.

The AR2000 operates on 24VDC or 120/240VAC. The AudioRouter

is UL Listed to standard 813 Commercial Audio Equipment. The

5yr AudioRouter is also FCC Approved

Industrial Amplifiers

Prices are subject to change without notice.  Inventory is subject to prior sale.  Product design, specifications & construction are subject to change without notice. Pictures are for general representational purposes and may not represent actual product.

Not Responsible for errors in print, verify all data with us or manufacturer.  Terms & Conditions of sale apply, for a copy contact us.

Products may be discontinued without notice.  Pricing Does Not Include Freight Costs.