Perimeter fence protection intrusion detection alarm system systems at an affordable cost for a wide range of applications. Easy Simple to Install.

Perimeter fence protection intrusion detection alarm system systems at an affordable cost for a wide range of applications. Easy Simple to Install.

1-800-843-6036

Click Here to Email Us

    OnLine Order

 
Stealth-Flex

Perimeter fence protection intrusion detection alarm system at an affordable cost for a wide range of applications. Easy Simple to Install.

Perimeter fence protection intrusion detection alarm system

Wireless Perimeter Fence Sensor Intrusion Detection Security Alarm System. Easy to Install.

Wireless Perimeter Fence Sensor Intrusion Detection Security Alarm System. Wireless Communication Stealth-Flex Fence System

Wireless

 

Perimeter fence protection intrusion detection alarm system systems at an affordable cost for a wide range of applications. Easy Simple to Install.

 

Industrial Audible Signaling

Industrial Sound Management
 

Federal Signal Air Horns Models 3H 4H 4M 6H

 OPERATING POWER 120 VAC AVAILABLE IN OUTPUT POWER RATINGS OF 600 1200 2000 3000 WATT WATTS two 2 channel channels

Industrial Amplifiers
The Federal Signal Model L is a general–purpose electro–mechanical siren that produces a distinctive sound and tonal quality for industrial applications l-120 l-240

L General Alarm Siren

Audio Routers
federal signal 56 Resonating Horn Produces 106dBa @ 10' (116dBa @ 1m) Indoor outdoor use FM Approved The Federal Signal Models 55 and 56 are electric horns that produce sound by means of a diaphragm, which resonates a column of air Both models feature corrosion resistant cast aluminum housings their rugged designs seal out corrosive dust and vapors. Both models have sufficient output to penetrate through high ambient noise levels.

56 & 55 Resonating Horn

 Federal Signal Model 2-120 & 2-240 outdoor warning siren is an omni-directional siren can serve as an outdoor manufacturing plant factory refinery facility wide warning system.

2-120 & 2-240 Omni-Directional Outdoor Warning Siren
   

 

EXPLOSION PROOF SIGNALING PRODUCTS

These Explosionproof Explosion Proof Explosion-proof Federal Signal Public Address speakers are UL and cUL Listed for Class 1, Division 1, Groups B, C, and D environments.

Public Address Explosion Proof Speakers 30 & 15 WATT

Fireball® 2 Federal Signal Explosion Proof Explosion-Proof Strobe Warning Light

FB2PSTX EXPLOSION PROOF STROBE

Visual Signaling

Hazardous Area Visual Signaling

federal signal LSHLS Litestak® Homeland Security Status Indicator

Homeland Security Status Indicator

USIX Hazardous Location UniStat™ Status Indicator Federal Signal The UniStat™ is an LED (light emitting diode) based, multicolor, single–high status indicator.

USIX Hazardous Location Status Indicator

 

Federal Signal's Model 27S is a medium sized, highly effective warning light designed for upright mounting and AC operation. 27S Pioneer™ Rotating Beacon Ray Model 27S is a versatile warning or signaling light useful in a variety of in–plant applications. It has been designed for permanent installation where a 120VAC, 50/60Hz line voltage is available.

27S PIONEER™ ROTATING BEACON RAY

federal signal 151XST Hazardous Location Warning Light Available in 12–24VDC, 120VAC and 240VAC Six dome colors Type 4X, IP66 enclosure Marine Rated UL and cUL Listed, CSA Certified The Model 151XST strobe light is UL Listed and CSA Certified for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III This warning light can be used for plant evacuation or other communication needs.

151XST Hazardous Location Warning Light

federal signal 131DST Starfire® Strobe Warning Light Starfire strobe warning lights contain their own strobe power supply in the base of the light. warn of hazardous conditions, mark dangerous areas UL and cUL Listed, CSA Certified Five dome colors Available in 12–24VDC, 120VAC and 240VAC amber blue clear green red lens strobes

131DST Starfire® Strobe Warning Lights

 

federal signal strobe 154XST Hazardous Location Supervised Warning Light Available in 24VDC Four wires and supervisory diode amber blue clear green magenta red dome colors 3/4" 3/4 inch pipe mount Marine Rated Supervisable 4 four wire power circuit CSA Certified for indoor & outdoor use The Model 154XST strobe light is UL and cUL Listed, and CSA Certified for Class I, Division 2, Groups A, B, C and D; Class II, Division 1, Groups E, F and G; and Class III.

154XST 4 Wire Supervised 12-24VDC Warning Light Hazardous Location

225 Electraray® Rotating Warning Light federal signal signaling rotating strobe warning light designed for industrial uses adaptable for a multitude of indoor and outdoor applications Federal Signal's Electraray rotating light is an inexpensive warning light for calling attention to emergency situations or process status changes. Amber blue clear green red dome strobe colors.

225 Electraray® Rotating Warning Light

federal signal 191X Hazardous Location Steady Burning warning Light Uses standard A–19 incandescent lamp (40W–100W) Type 4X, IP66 enclosure hazardous location steady burning light is rated for operation with any voltage from 24 to 250 VAC or VDC. Strobe Warning Light uses standard a-19 incandescent lamp bulb 40w - 100w Type 4X water–tight water tight operation with any voltage from 24 to 250 VAC or VDC.

191X Steady Burning Hazardous Location Light

Federal Signal Partial Listing. Contact us for Federal Signal Items Not Shown.

 

 

191XL Flashing LED Hazardous Location Warning Light with XLT™ federal signal signaling The model 191XL is a hazardous location flashing signal light that features the super bright LED array with XLT™, eXtreme Light Technology The 191XL is UL Listed for Class I, Division 2, Groups A, B, C and D; Class II Division 1, Groups E, F and G; and Class III. The Model 191XL has been certified by UL as meeting Type 4X watertight and corrosion-resistant requirements, and IP66 rated, ready for mounting on a 3/4 inch pipe Marine Listed vibration resistant LED lamp

191XL Flashing LED Hazardous Location Warning Light

 

federal signal 224XST Electraray® Supervised Hazardous Location Strobe Warning Light 24VDC Four wires and supervisory diode Six lens colors 1/2 inch pipe mount Type 4X, IP66 enclosure certified by UL as meeting Type 4X watertight and corrosion resistant requirements, constructed to IP66 The 224XST is UL Listed, CSA Certified and CSFM Approved for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III. odel 224XST is ideal for wet, corrosive atmospheres like those found in food processing industries, or anywhere a visual signal is needed.

224XST Electraray® Supervised Hazardous Area Strobe Warning Light

 

225X Electraray® Hazardous Location Rotating Warning Light federal signal signaling strobe compact, economical rotating warning light designed for a variety industrial applications. Federal Signal's affordable Electraray rotating warning light is specifically designed for use in hazardous locations or where corrosive materials are present.

225X Electraray® Hazardous Location Rotating Warning Light

 
 

225XL Electraray® Hazardous Location LED Flashing Warning Light with XLT™ federal signal Available in 24VAC/DC, 120VAC and 240VAC Flashing mode standard, configurable to Steady-burn steady burn Type 4X, IP66 enclosure, Marine Listed The Model 225XL has been certified by UL as meeting Type 4X watertight and corrosion-resistant requirements, and is rated for Division 2 applications. red blue clear amber green colors The Federal Signal Model 225XL is ideal for wet, corrosive atmospheres like those found in food processing industries or anywhere a vibration-resistant visual signal is needed.

225XL Electraray® Hazardous Location LED Flashing Warning Light

Federal Signal Partial Listing. Contact us for Federal Signal Items Not Shown.

 

225XST Electraray® Hazardous Location Strobe Warning Light, 12–24VDC, 120VAC and 240VAC, 1/2 inch pipe mount, Indoor/outdoor use Type 4X, IP66 enclosure (Dome up orientation) UL and cUL Listed, CSA Certified The Model 225XST has been certified by UL as meeting Type 4X water tight and corrosion resistant requirements; constructed to IP66 Model 225XST is ideal for wet, corrosive atmospheres like those found in food processing industries, or anywhere a visual signal is needed.

225XST Electraray® Hazardous Location Strobe Warning Light
 

 

federal signal strobe 225XST-I Electraray® Hazardous Location Strobe Warning Light The 24VDC 225XST–I features a voltage in–rush limiting PCB design that provides greater compatability with factory automation control systems and less electrical interference with in–rush sensitive devices. Model 225XST is ideal for wet, corrosive atmospheres like those found in food processing industries, or anywhere a visual signal is needed.

225XST-I Electraray® Hazardous Location Strobe Light
Federal Signal SIGNALING PRODUCTS on www.midsouthelectronics.com   Federal Signal Partial Listing.

AVIATION OBSTRUCTION LIGHTING

    
EXPLOSION PROOF SIGNALING - VISUAL

121X Explosion Proof Rotating Light

Fireball2 Explosion-Proof Strobe Light

FB2PSTX-I Explosion Proof Strobe

27XL Explosion-Proof LED Warning Light

27XST Explosion Proof Strobe

  

EXPLOSION-PROOF SIGNALING -AUDIBLE

Explosion-Proof Vibrating Horn 31X & 41X

55X Explosion Proof Resonating Horn

ExplosionProof General Alarm Siren

300X Explosion Proof Speaker/Amplifier

    

Visit us at  other webs:

midsouthcable.com     midsouthelectronics.com      midsouthglobal.net

webnetcable.com            webelectrical.net                ruggednetworks.net

inetparts.com                        midsouthlighting.com